Cross conveyor chains, China Cross conveyor chains Manufacturers, Suppliers, Factory

Description

The chain is driven by the driving chain and runs continuously in the track. It plays the role of suspension and transmission in the conveyor. The conveyor chain is bidirectionally articulated, so in addition to linear motion, it can also follow the movement of the track. Curved shape, completing spatial curvilinear motion in horizontal and vertical planes.

The figure below shows a simplified diagram of the conveyor chain of the XF series conveyor. Each section (T) has 4 running wheels, 4 guides and 2 cross sections. The running wheel and the guide wheel are connected by double chain plates through cross joints and pins. After the detachable hanging plate or fixed hanging plate is hung in the middle of the pin shaft, the workpiece can be transported. Their running wheels and guide wheels both adopt double-row ball structures, and their sizes are generally φ38 and φ45 bearings as guides and running wheels, and the track width is adjusted accordingly.

Cross conveyor chains factory

Parameter

Type	Project
Type	Workpiece temperature	Pitch	Breaking load	Allowable tension	Single point lifting	Conveying speed
WF-350	-20~280℃	350mm	≥50KN	5KN	50-100kg	≥15m/min
XWF-350	-20~280℃	350mm	≥50KN	5KN	50-150kg	≥15m/min
WF-381	-20~280℃	381mm	≥70KN	7KN	50-100kg	≥15m/min
XWF-381	-20~280℃	381mm	≥90KN	8KN	50-150kg	≥15m/min
WF-400	-20~280℃	400mm	≥90KN	8KN	50-100kg	≥15m/min
XWF-400	-20~280℃	400mm	≥90KN	8KN	50-150kg	≥15m/min
XWF-500	-20~280℃	500mm	≥100KN	10KN	150-250kg	≥15m/min